Construction and Testing of Continuous Feed Biomass Thermosyphon Torrefaction Reactor

Nitipong Soponpongpipat, Sanphasit Chonlaphan

Abstract


Because of different heat mechanism, the temperature distribution inside a reactor has its own characteristic. This is the limitation to increase the capacity of the reactor. This idea led to modify fixed-bed reactor that has a limitation on non-uniform temperature distribution inside a reactor with increasing heat transfer area by setting thermosyphon tube since fixed-bed reactor has another limitation in capacity and heat loss. Therefore, modifying fixed-bed reactor to operate as semi-batch can fix the limitation and improve thermal efficiency of a reactor as well. In order to study the performance of the reactor for torrefaction process, analyzing the fuel properties of each torrefied biomass batch is necessary. The controlled variables of this research are the temperature of heating chamber, which are 350, 400 and 400°C with an allotted torrefaction time of 35 minutes per batch that is close to research condition of thermosyphon reactor fixed-bed type. Fuel properties analyzed in this research are high heating value (HHV), bulk density, and energy density. This research also recorded the temperature inside the reactor to determine the temperature distribution when operated as a semi-batch reactor. From the results gathered, it was discovered that when the operating reactor reached a steady behavior, the torrefaction process increased to a high level. As seen in energy density ratio, it reached a high level because of the increase of HHV ratio, that is 1.182 - 1.412 for 350 - 450°C. The bulk density ratio is also very low, and the value is close to a herbaceous biomass type that is usually seen in woody samples. These factors cause such energy density ratio in high levels and intensity of such process inside the reactor.

Keywords


Fuel properties; Mixed wood sawdust; Semi-batch; Thermosyphon; Torrefaction; Torrefied biomass

Full Text:

PDF

References


Prins M.J., P.K.J., and Janssen F.J.J.G, 2006. More efficient biomass gasification via torrefaction. Energy 31(15): 3458-3470.

Dhungana A., Basu P., and Dutta A., 2012. Effects of reactor design on the torrefaction of biomass. Journal of Energy Resources Technology 134(4).

Medic D., Darr M., Shah A., Potter A., and Zimmerman A., 2012. Effects of torrefaction process parameters on biomass feedstock upgrading. Fuel 91: 147-154.

Basu P., 2018. Chapter 1 - Introduction, In Biomass Gasification, Pyrolysis and Torrefaction (Third Edition), Academic Press. pp. 1-27.

Bergman P.C., Boersma A.R., Zwart R.W.R., and Kiel J.H.A., 2005; Torrefaction for biomass co-firing in existing coal-fired power stations (ECN-C-05-013) Energy research Centre of the Netherlands.

Repellin V.G.A., Rolland M., and Guyonnet R., 2010. Modelling anhydrous weight loss of wood chips during torrefaction in a pilot kiln. Biomass Bioenergy (34): 602-609.

Ciolkosz, D. and Wallace, R., 2011. A review of torrefaction for bioenergy feedstock production. Biofuels, Bioproducts and Biorefining 5(3): 317-329.

Nachenius, R. W., van de Wardt, T. A., Ronsse, F., & Prins, W. 2015; Torrefaction of pine in a bench-scale screw conveyor reactor. Biomass and Bioenergy 79: 96-104.

Mei Y., 2015. Torrefaction of cedarwood in a pilot scale rotary kiln and the influence of industrial flue gas. Bioresource Technology (177): 355–360.

Njeng A.S.B., 2015. Effect of lifter shape and operating parameters on the flow of materials in a pilot rotary kiln: Part I. Experimental RTD and axial dispersion study. Powder Technology (269): 554-565.

Wang Z., Lim C.J., Grace J.R., Li H., and Parise M.R., 2017. Effects of temperature and particle size on biomass torrefaction in a slot-rectangular spouted bed reactor. Bioresource Technology 244: 281-288.

Wang Z., Lim C.J., and Grace J.R., 2019. A comprehensive study of sawdust torrefaction in a dual-compartment slot-rectangular spouted bed reactor. Energy (189):116-306.

Batidzirai B., Mignot A.P.R., Schakel W.B., Junginger H.M., and Faaij A.P.C., 2013. Biomass torrefaction technology: Techno-economic status and future prospects. Energy 62: 196-214.

Soponpongpipat N., Nanetoe S., and Comsawang P., 2020. Thermal degradation of cassava rhizome in thermosyphon-fixed bed torrefaction reactor. Processes 8(3).

Thermosyphon Technology for Ground Freezing. 2015. Retrieved 8 June 2020, From the World Wide Web: http://simmakers.com/thermosyphon-technology-ground-freezing.

Junsatien W., 2013. Fixed bed torrefaction reactor with thermal management system by using thermosyphon. M. Eng Thesis, Silpakorn University.

Mok W.S.L., Antal Jr. M.J., Szabo P., Varhegyi G., and Zelei B., 1992. Formation of charcoal from biomass in a sealed reactor. Industrial and Engineering Chemistry Research 31(4): 1162-1166.

Li H., 2012. Torrefaction of sawdust in a fluidized bed reactor. Bioresource Technology 103(1): 453-458.

Singh R.K., Sarkar A., and Chakraborty J.P., 2019. Effect of torrefaction on the physicochemical properties of pigeon pea stalk (Cajanus cajan) and estimation of kinetic parameters. Renewable Energy (138): 805-819.

Singh S., Chakraborty J.P., and Mondal M.K., 2020. Torrefaction of woody biomass (Acacia nilotica): Investigation of fuel and flow properties to study its suitability as a good quality solid fuel. Renewable Energy (153): 711-724.

Cardona S., Gallego L.J., Valencia V., Martínez E., and Rios L.A., 2019. Torrefaction of eucalyptus-tree residues: A new method for energy and mass balances of the process with the best torrefaction conditions. Sustainable Energy Technologies and Assessments 31: 17-24.

Zhang C., Ho S.H., Chen W.H., Xie Y., Liu Z., and Chang J.S., 2018; Torrefaction performance and energy usage of biomass wastes and their correlations with torrefaction severity index. Applied Energy 220: 598-604.